The SDM630 V2 three-phase energy meter is an accurate and cost-effective solution for measuring and displaying all major power and electrical quality parameters. It is easy to program, mount, and navigation friendly. These features make it the ideal choice for users who require a reliable energy meter.
The device is built to high quality standards, using state-of-the-art microprocessors and the best available manufacturing technologies. The product, which can be installed on a DIN rail, has a backlit display and user-programmable TA report (CT version).
All features are accessible from an intuitive interface.
The SDM630 can measure and display:
- Line voltage and THD% (total harmonic distortion) of all phases.
- Line frequency currents, current usage and THD% current of all phases.
- Active energy imported and exported.
- Imported and exported reactive energy
The following settings are password protected:
- Change password
- Power system selection: 1 phase 2 cables, 3 phases 4 cables
- PT (1 to 500000V)
- Required interval time
- Reset measurements required
- Output pulse duration
The device is available in versions:
- SDM630-Modbus MID (direct reading version) - Direct reading up to 100A, I/F Modbus RTU
- SDM630MCT-Modbus MID (CT-5A version) - Indirect reading with Amperometric Transformer (TA) or direct reading up to 5A, I/F Modbus RTU.
Typical application of electricity monitoring
In the European Union, the use of MID-certified energy meters "Measuring Instruments Directive" on "private" electricity networks is mandatory in the context of active energy billing based on consumption reading.
Typical examples include: campsites, holiday homes, student accommodation, office buildings, shopping malls, marinas, exhibition halls, electric vehicle charging stations, etc.
Being a certification at European level carried out by a Notified Body (NB), MID certification avoids legal metrological testing at national level.
An MID certified meter can therefore be used for active energy billing in all EU countries.
The directive also requires product certification according to the EN50470-1/ -3 standard, as well as design certification (Module B) and production process certification (Module D), by a Notified Body, in order to ensure product traceability and guarantee its metrological value, to protect consumers.
ideaopen (proprietario verificato) –
Excellent device, TA 400/5, connected to a raspberry, industrial plant monitoring